New Outlet Installation
Add outlets to rooms where power is limited or inconveniently placed. New outlets can make it easier to arrange furniture, use electronics, charge devices, and power equipment without running cords across the room.
Outlet Installation Services in Utah
Add safe, convenient power where you need it. O'Bray Electric installs and replaces electrical outlets for homes and businesses throughout Utah's Wasatch Front, with work led by a licensed Master Electrician.
Master Electrician
Highest tier of electrical licensing in Utah.
Licensed & Insured
Fully licensed and insured for your protection.
100% Satisfaction
We stand behind every install with a full guarantee.
Affordable & Fair Pricing
Honest written quotes, no surprises, fair pricing every time.
Get A Quote
Loading the quote form...
Safe, Convenient Outlets for Your Property
Outlets should support how you use each room without forcing you to depend on extension cords or overloaded power strips. Whether you need an outlet for a television, home office, appliance, workshop, finished basement, or outdoor space, proper planning helps protect your electrical system and keeps the finished installation clean.
O'Bray Electric can evaluate your existing wiring, electrical panel capacity, planned equipment, and outlet location before recommending the right installation. We handle the work with close attention to safety, code requirements, and long-term reliability.
Need an Outlet in the Right Place?
Have a licensed Master Electrician install safe, convenient outlets for appliances, home offices, entertainment areas, workshops, and everyday use.
Electrical Outlet Installation Services
Every room and electrical load has different requirements. We install outlet solutions based on the location, intended use, and capacity of the existing electrical system.
Outlet Replacement
Loose, cracked, scorched, or unreliable outlets may need professional attention. We can inspect the outlet and surrounding wiring, identify the cause of the problem, and replace damaged components when appropriate.
GFCI Outlet Installation
Ground-fault circuit interrupter outlets are commonly used in areas where electricity may be exposed to moisture. Depending on the property and applicable requirements, these may include kitchens, bathrooms, garages, unfinished basements, outdoor areas, and other suitable locations.
USB and USB-C Outlets
Outlets with built-in USB or USB-C ports provide convenient device charging without requiring a separate adapter. They can be useful in bedrooms, kitchens, home offices, and other frequently used spaces.
Tamper-Resistant Outlets
Tamper-resistant receptacles include built-in shutters designed to help prevent foreign objects from entering the outlet slots. We can determine where this outlet type is appropriate for your project.
Outdoor Outlets
Outdoor outlets must be selected and installed for their environment. This may involve suitable weather-resistant equipment, protective covers, and ground-fault protection based on the location and applicable requirements.
Appliance and Equipment Outlets
Large appliances and specialized equipment may have different voltage, receptacle, and circuit requirements than ordinary household devices. We assess the equipment specifications and electrical system before installation.
Commercial Outlet Installation
Businesses may need outlets for workstations, displays, equipment, break rooms, tenant improvements, or changing floor plans. We provide outlet installation based on the property's use and electrical demands.
Need More Convenient Electrical Outlets?
Add properly installed outlets where you need them without relying on extension cords or overloaded power strips.
Planning Outlet Placement
Good outlet placement starts with understanding how the space will be used. Furniture, televisions, desks, appliances, tools, charging stations, and future plans can all affect the best location.
Before installation, consider:
- Where furniture and equipment will be positioned
- Which devices will remain plugged in
- Whether the outlet will serve a large appliance or specialized equipment
- Whether moisture or weather exposure is possible
- Whether charging ports would be useful
- Whether the room may be remodeled or used differently later
- Whether additional wiring or a dedicated circuit may be needed
Planning these details early can produce a cleaner installation and reduce the need for extension cords.
Outlets for Different Rooms and Uses
Kitchens
Kitchen outlets may serve countertop appliances, refrigerators, microwaves, dishwashers, disposals, and other equipment. The correct outlet and circuit arrangement depends on the appliance, location, existing system, and applicable requirements.
Bathrooms
Bathroom outlets require careful consideration because they are used near water. Proper placement and ground-fault protection help create a safer, more functional space.
Bedrooms and Living Areas
Additional outlets can support lamps, televisions, entertainment systems, chargers, and furniture layouts. Outlet placement should remain accessible without becoming visually distracting.
Home Offices
Computers, monitors, printers, chargers, networking equipment, and adjustable desks can quickly fill the available outlets. A properly planned office can reduce cord clutter and provide power where equipment is actually used.
Basements
Finished and remodeled basements may need outlets for bedrooms, offices, entertainment rooms, wet bars, appliances, or workshops. Outlet planning should be coordinated with the room layout before walls and finishes are completed whenever possible.
Garages and Workshops
Tools, freezers, workbenches, battery chargers, and other equipment may create higher or more specialized electrical demands. The planned loads should be evaluated before adding outlets.
Outdoor Areas
Patios, yards, holiday lighting, landscaping equipment, and exterior projects may benefit from outdoor power. Outdoor installations require equipment and protection appropriate for the location.
Dedicated Circuits and Electrical Capacity
Adding a standard convenience outlet is not the same as installing power for a large appliance or high-demand piece of equipment.
Depending on the intended load, a new dedicated circuit may be appropriate. This allows specific equipment to operate on a circuit selected for its electrical requirements rather than sharing capacity with unrelated devices.
Before completing the work, O'Bray Electric can evaluate:
- The equipment's electrical specifications
- Existing circuit capacity
- Available electrical panel capacity
- Wiring conditions
- The proposed outlet location
- Applicable permit and inspection requirements
An electrical panel upgrade is not automatically required when adding an outlet. The appropriate solution depends on the condition and capacity of the existing system and the demands of the planned installation.
Outlet Safety and Warning Signs
An outlet problem can sometimes point to a loose connection, damaged receptacle, overloaded circuit, or another electrical issue.
Contact an electrician if you notice:
- A loose outlet or plug
- Cracked or broken outlet covers
- Discoloration or scorch marks
- Heat around the outlet
- Buzzing or crackling sounds
- A burning smell
- Intermittent power
- Sparks when connecting equipment
- Frequently tripped breakers
- Plugs that fall out easily
Stop using an outlet if it appears damaged, unusually hot, or burned. A professional inspection can determine whether the problem is limited to the receptacle or involves the wiring or circuit. If a receptacle is beyond repair, we also provide outdated outlet replacement.
Our Outlet Installation Process
- 1
Discuss Your Project
Tell us where you need power, how the space is used, and what equipment or appliances the outlet will serve.
- 2
Evaluate the Electrical System
We review the proposed location, nearby wiring, circuit capacity, electrical panel, and any relevant site conditions.
- 3
Recommend the Right Solution
We explain the suitable outlet type, placement, wiring, and circuit requirements in plain English.
- 4
Complete the Installation
The outlet and necessary wiring are installed with attention to safety, workmanship, and the finished appearance of the space.
- 5
Test the Work
We test the completed installation and coordinate applicable permit or inspection requirements for the project.
Why Choose O'Bray Electric?
O'Bray Electric is a family-run Utah electrical contractor led by a licensed Master Electrician. We provide straightforward advice and help customers choose outlet solutions based on how the space will actually be used.
Customers choose O'Bray Electric for:
- Master Electrician-led expertise
- Residential and commercial service
- Clear, plain-English communication
- Careful evaluation of circuits and panel capacity
- Attention to safety and code compliance
- Help with applicable permits and inspections
- Solutions designed for long-term use
Frequently Asked Questions
When should an electrical outlet be replaced?
An outlet may need attention if it is loose, cracked, discolored, unusually warm, unreliable, or no longer holds plugs securely. Buzzing, sparking, burning odors, and scorch marks should be evaluated promptly. The outlet and surrounding wiring should be inspected before assuming that replacing the receptacle alone will solve the problem.
Can you install an outlet where there is no existing outlet?
Often, yes. The feasibility and scope depend on the proposed location, access to suitable wiring, circuit capacity, wall construction, and the intended electrical load. An electrician should inspect the area before recommending the installation approach.
When does an outlet need a dedicated circuit?
A dedicated circuit may be appropriate for appliances or equipment with higher or specialized electrical demands. The decision depends on the equipment specifications, existing wiring, available circuit capacity, and applicable requirements.
Where are GFCI outlets commonly used?
GFCI protection is commonly associated with locations where electricity may be exposed to moisture, such as kitchens, bathrooms, garages, unfinished basements, and outdoor areas. The exact requirements depend on the installation, applicable electrical standards, and local inspection requirements.
Can USB or USB-C outlets replace regular outlets?
Combination receptacles can provide standard plug connections alongside built-in USB or USB-C charging ports. The appropriate product depends on the location, charging needs, available box space, wiring conditions, and electrical system.
Can my electrical panel support additional outlets?
Adding an outlet does not automatically require a panel upgrade. An electrician should evaluate the panel, existing circuits, planned load, and available capacity. Larger appliances or specialized equipment may require a new circuit or additional electrical work.
Get started
Discuss Your Outlet Installation Project
Make your property more convenient with professionally installed outlets placed for how you use the space. O'Bray Electric can assess your existing system, explain your options, and complete the installation with safety and long-term reliability in mind.
- Master Electrician-led service
- Clear recommendations
- Residential and commercial installations
- Appropriate outlet and circuit planning
- Permit and inspection coordination when applicable
Get A Quote
Loading the quote form...
Service Area
Serving The Wasatch Front And Beyond
We're a service-area business, no storefront required. Our experienced electricians travel to homes and businesses across Salt Lake, Utah, Tooele, and Davis counties so you get expert work without leaving your driveway.
Wasatch Front Service Area
Salt Lake, Tooele, Utah, and Davis counties, with service brought directly to your home or business.
Cities We Serve
Tap A County To Expand
- Salt Lake City
- Sandy
- Holladay
- Cottonwood Heights
- Sugar House
- Midvale
- Murray
- Millcreek
- Taylorsville
- West Jordan
- South Jordan
- West Valley City
- Kearns
- Magna
- Riverton
- Herriman
- Bluffdale
- Draper
- South Salt Lake